Make Your Tires Black Again in 5 Easy Steps

Black tires make your car look slick and elegant, but without proper care and maintenance, your tires can quickly look old and dirty.

Keeping your tires look brand new is not very difficult. Regularly cleaning them and applying tire dressing will keep your tires beautiful.

If you want to regain the elegance of your tires, follow the few easy steps below:

How To Make Car Tires Black: Step-by-Step Guide

Step 1. Remove the Dirt With Plain Water

Rinsing off the dirt on your tires is the very first step you need to take. It is a simple process of cleaning your tires using water.

A pressure hose is an ideal tool to use to rinse off tire dirt. Pressured water is very effective in removing even the toughest smudge on your tire. Moreover, the use of the hose allows you to target areas that are difficult to reach.

If you don’t have a pressure hose to use, you can always manually clean the dirt using a cleaning cloth and water.

Step 2. Apply Cleaning Solution

You can always use the ready-for-use tire cleaning sprays you can buy in the market. It is easy to use and very convenient.

However, if you don’t have one or you do not want to buy these ready-made solutions, making your own is the best way to go. It is as easy as mixing a dish soap in a spray bottle. If you don’t have a spray bottle, you can use a regular bucket and apply the solution using your cleaning cloth.

Step 3. Brush Your Tires

Using a hard-bristled brush, like the one used for laundry, brush your tires to ensure all the grimes come off.

Make sure to cover evenly clean your tires by brushing all the surfaces. You will know if your tire is still dirty when the brush still accumulates a lot of dirt. You can repeat the process until the tires you are sure that the tires are immaculate.

Step 4. Dry The Tires

You can use a microfiber cloth to dry your tires because it absorbs particles better than a regular cloth or towel. However, if you don’t have such kind of cloth, a regular towel will do. Your goal is to let dry the tires to prepare them for the application of the tire dressing.

Step 5. Apply The Tire Dressing

There are numerous tire dressings you could choose from in the market. You must read the specifications before going to the cashier to pay. If you want to achieve a shiny or slick look of your tires, purchase a tire dressing that specifies such a result.

You also need to read the application instructions carefully and make sure that you follow them. The result may be inadequate because of the wrong application. However, most of the tire dressings are applied by pouring it on a cloth and wiping it on the tire’s surface.

In most cases, tire dressing might need to be applied multiple times to achieve the desired level of blackness.

What if you don’t have a tire dressing available? Are there any alternatives?

Yes, of course! The simplest alternative you could use is a black soda or a transmission fluid. As long as your tires are thoroughly clean, you can wipe Coca-Cola or a transmission fluid on your tires, and you should be able to achieve a good blackness like what you get from applying tire dressing.

The only drawback of using a soda or a transmission fluid to make your tires black is that they usually attract a lot of dust, which may not be good after a few days of using your vehicle.

Conclusion

There you have it. Making your tire black again is not very difficult to do. You don’t need to go to a carwash shop to achieve slick-looking tires. Of course, you do need some materials like a tire cleaning solution and tire dressing. However, there are alternatives that you can use in case you don’t have any of them.

As far as how often you need to blacken your tires again, the answer is it depends. I would say, do it as soon as you see your tires need it.

Leave a Comment

Your email address will not be published. Required fields are marked *